|
|
|
Retrofit Screw-in base. |
|
IQTraffiContro.com Professional LED
Traffic Lights Manufacturer Exporter |
|
|
Full Ball: More and
more municipalities around the world are
waving goodbye to incandescent traffic
signals in favor of LED signals that
deliver up to 90 percent greater energy
efficiency and profound savings on
maintenance costs. Rugged Illumination
LED solutions like the new “Incandescent
Look” give traffic management
professionals a wide choice of robust,
quality signal designs that can meet
current ITE, Caltrans or EN 12368
standards. Illumination LED signals are
designed and rigorously tested to handle
conditions such as sun phantom, light
uniformity and color washout, which
incandescent signals struggle to perform
against.
Traffic
signals LED signals that deliver up to
90 percent greater energy efficiency and
profound savings on maintenance
costs. Rugged LED solutions . LED
signals are designed and rigorously
tested to handle conditions such as sun
phantom, light uniformity and color
washout, which incandescent signals
struggle to perform against.
Features and Specs
Up to 90% energy efficiency over
incandescent
Long life of 50,000 hours plus
12-inch (300mm) & 8-inch (200mm) modules
OEM or retrofit installation
Quality/reliability
Colors
Red, Yellow & Green
Applications
Replaces incandescent lamps in full ball
traffic signal applications |
Arrow: IQ
Pointing in the Right Direction. Traffic
management professionals around the
world are leaving maintenance intensive
and energy hungry incandescent lamps by
the curb and heading for the robust,
high-reliability advantages that IQLED
illumination LED arrow signals offer.
With up to 90 percent energy savings and
a long-rated life.
LED arrow signals outshine
incandescent signals and offer
significant advantages in dealing with
sun phantom, light uniformity and color
washout issues. Designed for direct
retrofit or OEM applications LED arrow signals offer.
With up to 90 percent energy savings and
a long-rated life |
|
Pedestrian Control:
Walk Don't Walk this way.
There’s no room for error when managing
pedestrian traffic or synchronizing the
movement of people and automobiles. LED
Pedestrian Control Signals provide
proven reliability and well-established
LED-versus-incandescent advantages: up
to 90% energy savings, longer life,
fewer maintenance hassles and lower
maintenance costs. Whether your needs
require a standard LED outline, new
“Incandescent Look” or
a more advanced unit with a digital
countdown display, a vast collection of
weatherproof LED pedestrian control
signals that meet a variety of
geographic and governmental
specifications.
LED Pedestrian Control
Signals provide proven reliability and
well-established LED-versus-incandescent
advantages: up to 90% energy savings,
longer life, fewer maintenance hassles
and lower maintenance costs
weatherproof LED pedestrian control
signals. |
IQ Traffic Control needs around the
world can be as diverse as the
geography. That’s why we developed the
LED signal module for Europe and South
America. Designed to operate in 230V
applications, this “incandescent look”
signal comes standard in 200 mm and 300
mm sizes to deliver up to 90% greater
energy efficiency and lower maintenance
costs.
   |
     |
   
 
  
    
 |
|
Technical Specs |
|
Application:
Enhancing all types of roadway signs
(stop, yield, wildlife, dangerous
corners, etc.)
Marking temporary and permanent road
barricade marking
Flashing flagger
Enhancing safety at construction and
detour zones
Indicating bridge and tunnel entrances
Marking hazards and infrastructure at
industrial sites
BENEFITS
-Quick installation - no external
wiring, cable trenching.
-Flexible design enables any
configuration of bi-directional or dual
flasher solution.
-Pays for itself within the first year
of operation in the form of reduced
installation, maintenance and servicing
costs
-Self-powering capability means it can
be installed anywhere
-Reliable operation 365 days per year at
nearly any location on earth
-IQ Engineered for up to five (+)
years of maintenance-free operation |
|
Programmable Signals, LED
Programmable Signals
LED Arrow Lenses
COUNTDOWN PEDESTRIAN SIGNAL
Available voltages 12VDC,
120VAC, 230VAC
12" RED LED BALL FLANGE MOUNT
8" RED LED BALL
FLANGE MOUNT
12" RED LED BALL SCREWBASE
8" RED LED BALL
SCREWBASE
12" AMBER LED BALL SCREWBASE
8" AMBER LED BALL
SCREWBASE
12" AMBER LED BALL FLANGE MOUNT
8" AMBER LED BALL FLANGE MOUNT
12" Blue-green LED BALL SCREWBASE
8" Blue-green LED
BALL SCREWBASE
12" Blue-green LED BALL FLANGE MOUNT
8" Blue-green LED BALL FLANGE MOUNT
12" RED LED ARROW SCREWBASE
12" RED LED ARROW FLANGE MOUNT
12" YELLOW LED ARROW SCREWBASE
12" YELLOW LED ARROW FLANGE MOUNT
12" Blue-green LED ARROW SCREWBASE
12" Blue-green LED ARROW FLANGE MOUNT
|
|
  
 |
|
Traffic
Plastic Cone, Height 18 Inches, Base 11 x 11 Inches, Stencil Plain,
Color Red/Orange, Easy Stacking, Polyvinyl Chloride
Traffic
Plastic Cone, Height 28 Inches, Base 14.5 x 14.5 Inches, Stencil Plain,
Color Red/Orange, Easy Stacking, PVC
  
Traffic
Reflective Cone, Height 28 Inches, Base 14.5 x 14.5 Inches, Stencil Two
6 and 4 Inches Reflective Collars, Color Red/Orange, PVC
|
|
 
 
|
|
  
    
    |
Strictly technical information meant to be
used by/for engineers and technicians. Please call us with any
inquiries regarding our capabilities. If we don't have it, we can make it. We
recommend using your browsers search feature for this page.
The Type 1 LED signal unit shall replace the reflector, socket, gasket, and lens
assembly of an incandescent signal section and shall fit the sections of an
incandescent signal face as specified in Section 86-4.01, "Vehicle Signal
Faces," of the Standard Specifications or may mount in the medium base lamp
socket just as an incandescent bulb mounts. Traffic products are available in
Type 1 or Type 2 configurations.
Type 1 LED signal module are designed to be installed in the door frame of a
standard traffic signal housing. The lamp socket, reflector, reflector holder
and lens used with an incandescent lamp shall not be used in a signal section in
which a Type 1 LED signal module is installed.
Type 2 LED signal modules shall be designed to mount in the standard lamp socket
normally used with an incandescent lamp. When a Type 2 LED signal module is
used, a standard traffic signal lens in the door frame shall be used, at the
option of the Contractor, the standard lens may be replaced with a translucent
red lens to seal the signal section from weather. The installation of a Type 2
LED signal module shall not require any modification to the standard lamp socket
or reflector.
Each Type 1 LED signal unit shall consist of a
convex lens made of red ultraviolet stabilized hard-coated plastic or glass, LED
circuit board with electronic switching module, and two conductors as specified
in Section 86-4.01 C, "Electrical Components," of the Standard Specifications.
The chromaticity of the red lens color shall match the chromaticity of the LEDs.
Electrical connection can be accomplished by each conductor with spade tongue
connector at the end, of sufficient length to reach a terminal strip mounted in
the blue-green signal section housing with the red section door open. The unit
shall be sealed with a one-piece neoprene EPDM (Ethylene, Propylene, Diene
Monomers) gasket, shall be watertight, and shall be designed to be mounted to
the door of the signal section housing using the same mounting method as the
signal lens.
Electrical circuits shall be designed to limit the current flowing through each
LED to 20 milliamps (ma) maximum at 120 volts AC (VAC). The failure of any LED
shall only result in the loss of not more than 2 percent of the total LEDs in
the signal unit.
Red LEDs shall be the ultra bright type and shall be rated for 100,000 hours of
continuous operation at nominal current and at 25°C. The operating temperature
range shall be from -30° C to 85° C. The LED emission spectrum shall meet the
present ITE chromaticity diagram according to the 1931 CIE standard. The viewing
angle shall be not less than 30°. Only Red and Yellow LEDs manufactured with
Indium technology will be used. Blue-green LEDs will utilize Nitrite technology.
PEEK Wavelength: Red 630nm
PEEK Wavelength: Yellow 588nm
PEEK Wavelength: Blue-Green 505-510nm
Flange mount units consist of an LED array, electronics, rear housing and lens.
Electrical connection can be accomplished by each conductor with spade tongue
connector at the end, of sufficient length to reach a terminal strip mounted in
the blue-green signal section housing with the red section door open. A black,
polycarbonate rear housing, that has a water impermeable air vent installed,
deters heat build-up in unit.
Screwbase units will consist of an LED array, electronics, rear housing and
clear dust cover. An Edison medium screwbase adapter installs directly into lamp
socket base and requires no modification to the signal housing. Indexed LEDs
utilize, existing glass lens double convex design characteristics, for enhanced
light throughput. A black, polycarbonate rear housing, that has a water
impermeable air vent installed, deters heat build-up in unit.
MODEL 1932 12" RED LED BALL FLANGE MOUNT
Each LED utilized in a 12-inch circular red indication shall be rated at 2Ø 1/2
30º to be 1900 millicandelas (mcd) typical at 20 ma. The number of LEDs shall be
sufficient to meet the light output specifications as outlined in Vehicle
Traffic Control Signal Heads: a standard of the ITE. The LEDs shall be wired in
a minimum of 65 parallel strings. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 12 inch red circular
indication shall be 20 watts +/- .5 watts at 120 VAC. Model 1932 has 650 LEDs,
and a red translucent hard-coated lens.
Also available in a screwbase version. MODEL 1932SB
MODEL RD12SB - 12" RED LED BALL SCREWBASE
Each LED utilized in a 12-inch circular red indication shall be rated at 2Ø 1/2
30º to be 1900 millicandelas (mcd) typical at 20 ma. The LEDs shall be wired in
a minimum of 42 parallel strings. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 12 inch red circular
indication shall be < 17 watts +/- .5 watts at 120 VAC. The RD12SB has 420 LEDS.
MODEL RD12FM - 12" RED LED BALL FLANGE MOUNT
Each LED utilized in a 12-inch circular red indication shall be rated at 2Ø 1/2
30º to be 1900 millicandelas (mcd) typical at 20 ma. The LEDs shall be wired in
a minimum of 42 parallel strings. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 12 inch red circular
indication shall be < 17 watts +/- .5 watts at 120 VAC. The RD12FM has 420 LEDS.
Prismatic lens.
MODEL RD1210FM - 12" RED LED BALL FLANGE MOUNT
Each LED utilized in a 12-inch circular red indication shall be rated at 2Ø 1/2
30º to be 3800 millicandelas (mcd) typical at 20 ma. The LEDs shall be wired in
a minimum of 16 parallel strings. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 12 inch red circular
indication shall be < 11 watts +/- .5 watts at 120 VAC. The RD1210FM has 160
LEDS and a red tint lens.
This unit is on the CALTRANS pre-qualified list.
MODEL YL12SB - 12" AMBER LED BALL SCREWBASE
Each LED utilized in a 12-inch circular amber indication shall be rated at 2Ø
1/2 30º to be 2500 millicandelas (mcd) typical at 20 ma. The LEDs shall be wired
in a minimum of 42 parallel strings. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 12 inch amber circular
indication shall be < 17 watts +/- .5 watts at 120 VAC. The YL12SB has 420 LEDS.
MODEL YL12FM - 12" AMBER LED BALL FLANGE MOUNT
Each LED utilized in a 12-inch circular amber indication shall be rated at 2Ø
1/2 30º to be 2500 millicandelas (mcd) typical at 20 ma. The LEDs shall be wired
in a minimum of 42 parallel strings. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 12 inch amber circular
indication shall be < 17 watts +/- .5 watts at 120 VAC. The YL12FM has 420 LEDS.
Prismatic lens.
MODEL YL1210FM - 12" AMBER LED BALL FLANGE MOUNT
Each LED utilized in a 12-inch circular amber indication shall be rated at 2Ø
1/2 30º to be 2500 millicandelas (mcd) typical at 20 ma. The LEDs shall be wired
in a minimum of 19 parallel strings. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 12 inch amber circular
indication shall be < 20 watts +/- .5 watts at 120 VAC. The YL1210FM has 190
LEDS and a yellow tint lens.
MODEL BG12SB - 12" Blue-green LED BALL SCREWBASE
Each LED utilized in a 12-inch circular blue-green indication shall be rated at
2Ø 1/2 30º to be 3800 millicandelas (mcd) typical at 20 ma. The LEDs shall be
wired in a minimum of 6 parallel strings. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 12 inch blue-green circular
indication shall be 15 watts +/- .5 watts at 120 VAC. The BG12SB has 258 LEDS.
MODEL BG12FM - 12" Blue-green LED BALL FLANGE MOUNT
Each LED utilized in a 12-inch circular blue-green indication shall be rated at
2Ø 1/2 30º to be 3800 millicandelas (mcd) typical at 20 ma. The LEDs shall be
wired in a minimum of 6 parallel strings. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 12 inch blue-green circular
indication shall be 15 watts +/- .5 watts at 120 VAC. The BG12FM has 258 LEDS.
Prismatic lens.
MODEL BG1210FM - 12" Blue-green LED BALL FLANGE MOUNT
Each LED utilized in a 12-inch circular blue-green indication shall be rated at
2Ø 1/2 30º to be 3800 millicandelas (mcd) typical at 20 ma. The LEDs shall be
wired in a minimum of 6 parallel strings. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 12 inch blue-green circular
indication shall be 12 watts +/- .5 watts at 120 VAC. The BG1210FM has 190 LEDS.
Prismatic lens.
This unit is on the CALTRANS pre-qualified list.
MODEL SWARROW
Each LED utilized in a 12 inch red arrow indication shall be rated at 2Ø 1/2 30º
to be 1900 mcd, typical at 20 ma. The LEDs shall be arranged in lines and shall
be wired in a minimum of 25 parallel strings. The power consumption of the 12
inch arrow indication shall be 7.5 watts +/- .5 watt. Model SWARROW has 240 LEDs
and a red translucent lens.
MODEL SWARROW-SB 12" RED LED ARROW SCREWBASE
The specifications are the same as the Model Swarrow with the exception of the
following. The unit will consist of an LED array, electronics, and an Edison
medium screwbase adapter and will require no modification to the signal housing.
MODEL AR12SB - 12" RED LED ARROW SCREWBASE
Each LED utilized in a 12 inch red arrow indication shall be rated at 2Ø 1/2 30º
to be 1900 mcd, typical at 20 ma. The LEDs shall be arranged in lines and shall
be wired in a minimum of 12 parallel strings. The power consumption of the 12
inch arrow indication shall be 6 watts +/- .3 watt. Model AR12SB has 120 LEDs.
MODEL AR12FM - 12" RED LED ARROW FLANGE MOUNT
Each LED utilized in a 12 inch red arrow indication shall be rated at 2Ø 1/2 30º
to be 1900 mcd, typical at 20 ma. The LEDs shall be arranged in lines and shall
be wired in a minimum of 12 parallel strings. The power consumption of the 12
inch arrow indication shall be 9 watts +/- .3 watt. Model AR12FM has 120 LEDs
and a red tint or masked lens available.
This unit is on the CALTRANS pre-qualified list.
MODEL AY12SB - 12" YELLOW LED ARROW SCREWBASE
Each LED utilized in a 12 inch red arrow indication shall be rated at 2Ø 1/2 30º
to be 1900 mcd, typical at 20 ma. The LEDs shall be arranged in lines and shall
be wired in a minimum of 12 parallel strings. The power consumption of the
12-inch arrow indication shall be 10 watts +/- .3 watt. Model AY12SB has 120
LEDs.
MODEL AY12FM - 12" YELLOW LED ARROW FLANGE MOUNT
Each LED utilized in a 12 inch red arrow indication shall be rated at 2Ø 1/2 30º
to be 1900 mcd, typical at 20 ma. The LEDs shall be arranged in lines and shall
be wired in a minimum of 12 parallel strings. The power consumption of the
12-inch arrow indication shall be 9 watts +/- .3 watt. Model AY12FM has 120
LEDs, and a yellow tint or masked lens available.
This unit is on the CALTRANS pre-qualified list.
MODEL AG12SB - 12" Blue-green LED ARROW SCREWBASE
Each LED utilized in a 12 inch blue-green arrow indication shall be rated at 2Ø
1/2 30º to be 3800 mcd, typical at 20 ma. The LEDs shall be arranged in lines
and shall be wired in a minimum of 4 parallel strings. The power consumption of
the 12 inch arrow indication shall be 10 watts +/- .3 watt. Model AG12SB has 120
LEDs.
MODEL AG12FM - 12" Blue-green LED ARROW FLANGE MOUNT
Each LED utilized in a 12 inch blue-green arrow indication shall be rated at 2Ø
1/2 30º to be 3800 mcd, typical at 20 ma. The LEDs shall be arranged in lines
and shall be wired in a minimum of 4 parallel strings. The power consumption of
the 12 inch arrow indication shall be 9 watts +/- .3 watt. Model AG12FM has 120
LEDs. A blue-green tint or masked lens is available.
This unit is on the CALTRANS pre-qualified list.
MODEL RDODOT08
Each LED utilized in an 8 inch circular red indication shall be rated at 2Ø 1/2
30º to be 1900 mcd typical at 20 ma. The number of LEDs shall be sufficient to
meet the ITE specifications as outlined in Vehicle Traffic Control Signal Heads:
a standard of the ITE. The LEDs shall be arranged uniformly throughout the
circle. The power consumption of the 8 inch red circular indication shall be 10
watts +/- .5 watts at 120 VAC. Model RDODOT08 has 330 LEDs, and a red
translucent hard-coated lens.
MODEL RD08SB - 8" RED LED BALL SCREWBASE
Each LED utilized in an 8 inch circular red indication shall be rated at 2Ø 1/2
30º to be 1900 mcd typical at 20 ma. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 8 inch red circular
indication shall be 7 watts +/- .3 watts at 120 VAC. Model RD08SB has 180 LEDs.
MODEL RD08FM - 8" RED LED BALL FLANGE MOUNT
Each LED utilized in an 8 inch circular red indication shall be rated at 2Ø 1/2
30º to be 1900 mcd typical at 20 ma. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 8 inch red circular
indication shall be 7 watts +/- .3 watts at 120 VAC. Model RD08FM has 180 LEDs.
Prismatic lens.
MODEL RD0806FM - 8" RED LED BALL FLANGE MOUNT
Each LED utilized in an 8 inch circular red indication shall be rated at 2Ø 1/2
30º to be 3800 mcd typical at 20 ma. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 8 inch red circular
indication shall be 8 watts +/- .3 watts at 120 VAC. Model RD0806FM has 86 LEDs.
Prismatic lens.
This unit is on the CALTRANS pre-qualified list.
MODEL YL08SB - 8" Amber LED BALL SCREWBASE
Each LED utilized in an 8 inch circular amber indication shall be rated at 2Ø
1/2 30º to be 2500 mcd typical at 20 ma. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 8 inch amber circular
indication shall be 7 watts +/- .3 watts at 120 VAC. Model YL08SB has 180 LEDs.
MODEL YL08FM - 8" Amber LED BALL FLANGE MOUNT
Each LED utilized in an 8 inch circular amber indication shall be rated at 2Ø
1/2 30º to be 2500 mcd typical at 20 ma. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 8 inch amber circular
indication shall be 7 watts +/- .3 watts at 120 VAC. Model YL08FM has 180 LEDs.
Prismatic lens.
MODEL YL0806FM - 8" Amber LED BALL FLANGE MOUNT
Each LED utilized in an 8 inch circular amber indication shall be rated at 2Ø
1/2 30º to be 2500 mcd typical at 20 ma. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 8 inch amber circular
indication shall be 12 watts +/- .3 watts at 120 VAC. Model YL08O6FM has 86
LEDs. Yellow Tint lens.
This unit is on the CALTRANS pre-qualified list.
MODEL BG08SB - 8" Blue-green LED BALL SCREWBASE
Each LED utilized in an 8 inch circular Blue-green indication shall be rated at
2Ø 1/2 30º to be 3800 mcd typical at 20 ma. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 8 inch blue-green indication
shall be 8 watts +/- .3 watts at 120 VAC. Model BG08SB has 180 LEDs.
MODEL BG08FM - 8" Blue-green LED BALL FLANGE MOUNT
Each LED utilized in an 8 inch circular blue-green indication shall be rated at
2Ø 1/2 30º to be 3800 mcd typical at 20 ma. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 8 inch blue-green indication
shall be 8 watts +/- .3 watts at 120 VAC. Model BG08FM has 180 LEDs. Prismatic
lens.
MODEL BG0806FM - 8" Blue-green LED BALL FLANGE MOUNT
Each LED utilized in an 8 inch circular blue-green indication shall be rated at
2Ø 1/2 30º to be 3800 mcd typical at 20 ma. The LEDs shall be arranged uniformly
throughout the circle. The power consumption of the 8 inch blue-green indication
shall be 10 watts +/- .3 watts at 120 VAC. Model BG08FM has 86 LEDs, and water
clear lens.
PV18X10RD - PV - Red retrofit, 11 watts. This unit is on the CALTRANS
pre-qualified list.
PV18X10YL - PV -Yellow retrofit, 15 watts. This unit is on the CALTRANS
pre-qualified list.
PV30X6BG - PV -Blue-green retrofit, 15 watts. This unit is on the CALTRANS
pre-qualified list.
Light Emitting Diode Pedestrian International symbol don't walk "HAND" Signal
Indication. -- All pedestrian symbols don't walk "HAND" signal indications shall
be provided with a light emitting diode (LED) signal unit. The LED signal unit
shall replace the incandescent bulb of a Type A signal unit as specified in
section 86-4.03, "Pedestrian Signal Faces," of the Standard Specifications,
while requiring no further modification of the pedestrian signal head.
Each LED pedestrian signal shall consist of a LED matrix circuit board with
electronic switching module, and a black polycarbonate rear housing, that has a
water impermeable air vent installed, deters heat build-up in unit.
Electrical circuits shall be designed to limit the current flowing through each
LED to 20 milliamps (ma) maximum at 120 Volts AC (VAC). The failure of any LED
in a string shall only result in the loss of 2% or less of the total LEDs in the
LED pedestrian signal unit.
MODEL HODOTPOR
Each LED utilized in a pedestrian signal "HAND" indication shall be rated at 2Ø
1/2 30º to be 1400 mcd typical at 20 ma. The LEDs shall be arranged to uniformly
illuminate the raised hand symbol of the Type A pedestrian signal message plate.
The LEDs shall be wired in a minimum of 3 parallel strings. The power
consumption of the LED pedestrian signal unit shall be 8 watts +/- 1 watt at 120
VAC.
Model HODOTPOR - Ped hand has 220 LEDs. (Side by Side HOUSING) 16" Hand,
Portland oran
MODEL SMHAND - Ped Hand has 148 LEDs (12 X 12 HOUSING) 8.75" Hand
Model LWMAN - Ped MAN has 220 LEDs. (Side by Side HOUSING) 16"
Model HMSXS - Ped Hand/Man Combo Side by side Ped hand/man, 10 watts
Obstruction Bulbs can be made to operate at 120 volt or 220-240 Volt
Obstruction BULB - Portland-Orange, bulb design, Ped Retrofit 8 watts
Obstruction BULB - Red, bulb design, Outdoors lighting. 8 watts
Obstruction BULB - Yellow, bulb design, Corridor lighting. 8 watts
Obstruction BULB - Blue, bulb design, accent lighting, 8 watts
Obstruction BULB - Blue-green, bulb design, bridge lighting, 8 watts
Obstruction BULB - Green, 8 watts
|
|
http://www.oksolar.com/n_cart/search.asp?cat=Traffic |
UPS
backup your traffic systems with IQFuelCell
IQEnergy:
IQ Fuel cells are now available as an
alternative source for renewable energy.
Unlike traditional power generators,
they don't require gasoline to generate
power. They also provide an alternative
to solar generators because they do not
depend on any external power gathering
equipment. These units are compact,
durable, and built to power a wide range
of applications.
The Best Generator Ever!
Applications: Airports, Computer Rooms,
Hospitals, Traffic, UPS
|
Traffic NEMA Enclosures |
|
|

The SPDC/AC
unit
was designed to be easily expanded: power units can range from 2,000 Watts
to 10,000 Watts. Its flexible platform design allows it to be easily
customized for use with area lighting, remote communications, security
systems, and surveillance equipment, to name a few applications. Charge
power alone can be doubled or tripled with the addition of simple,
cost-effective photovoltaic capture equipment.
Pre-assembled &
Factory Tested
More Information
> |
|
IP Video Anywhere Solar Powered!
Protecting Critical
Government Infrastructure
Military and Homeland Surveillance
IP Video AnyWhere Solar Powered!
IP Video solutions are the next wave in CCTV surveillance. The
ability to monitor your systems from anywhere, IP video solution.
Keep an eye on your
critical facilities at all times.
With OkSolar’s OkIP Video Anywhere, you can monitor sites several
thousand miles away as if they were across the street. Our system
facilitates remote site surveillance through energy-independent
operation and allows video to be transmitted over IP without any
physical lines being installed. Companies with remote or hard to access
assets, such as oil and gas pipelines, bridges or rural properties, have
not had an effective, economical solution for protecting those assets.
Some of the features like automated archiving
allow you not only to track construction progress in real time but also
to retrieve past images which can be used to resolve issues quickly.
|
Traffic Warning Signals
Our 12', 2 Head, Solar powered school
warning flasher signal is the cost effective solution to your pedestrian safety
problems. More Information
> Traffic control lights, LED
Traffic signals Manufacturer & Distributor, School Zone LED, School Zone LED
flashing beacon, 24 7 hour led flashing beacon traffic, school zone, School
warning signals, 24 hours warning Flashers, Road way warning signals, pedestrian
crossing, railroad warning, ice on bridge warning, low water crossing, led
beacons, speed awareness displays, Solar Powered Pedestrian Beacon, Pedestrian
Beacons, 24/7 Flashing Beacon |
|
All components
needed for installation are included (except for the mounting pole). The
systems are designed for installation onto a wood, concrete, or metal
mounting pole. You may choose to use your own pole or we can quote the
poles separately from the lighting system itself.
 
These units can be used for: Area lighting, Billboards lighting, Dock
lights, Park lighting, Parking lot lighting, Parkway lighting, walkway
lighting, Street lighting, Transit Lighting, Outdoor area lighting
|
Easy to retrofit LED streetlights can easily
retrofit existing metal halide, high pressure sodium
and mercury vapor luminaries.
Your next schedule IQLED maintenance will be in 5 to
8
years
with our IQ Retrofit Lamps!
IQLED Unlike bulb streetlights,
IQLED lighting
modules produce very intense light in tightly
control IQLED directions. There is no longer a need for
reflectors or cut-off shields to minimize light
pollution and trespass. With IQLED energy usage less
than 20% and lifespan more than seven times that of
conventional streetlights, payback occurs very early
in a long life cycle.
If you are committed to
savings and reduce the level of light pollution
by using the most efficient IQ LED
street-light fixtures and employing the latest
design methods.
|
IQEnergy:
IQ Fuel
cells Are you tired of your devices
being left in the dark, when your solar energy system stops providing power?
Then IQ Fuel Cells are the perfect answer for you. Are now available as an alternative source
for renewable energy.
Unlike traditional power generators, they don't require
gasoline to generate power. They also provide an alternative to solar
generators because they do not depend on any external power gathering
equipment. These units are compact, durable, and built to power a wide
range of applications.
The Best Generator Ever!
Applications: Airports,
Computer Rooms,
Hospitals,
Traffic,
UPS
Smart designs with
IQ Fuel Cells for smart energy applications Contact us today! >
|
|
Highly
automated communications process by which data are
collected from instruments located at remote or inaccessible points
and transmitted to receiving equipment for measurement, monitoring,
display, and recording can be found in our online store.
More Information
>

Products for material handling applications like
Underground Mining, Processing & Airport Transportation industries,
Military Applications, Whether your application requires SPEED
MONITORING, REMOTE CONTROLS.
|
|
Battery Backup Systems for LED Traffic Signs Increase the public safety
and reduced traffic congestion by allowing traffic lights to function even
during a power failure. A typical traffic signal
intersection experiences eight to ten local power outages annually.
With IQUPS battery backup power, some or all the traffic control signals
can continue to operate. This seamless switchover to battery power increases
public safety and eliminates the need to dispatch police or other service
personnel to direct traffic. If all traffic signals were converted to LEDs,
the battery backup system would allow full operation of the traffic signals
during a power outage, thus alleviating traffic congestion.
Important feature is the battery backup system’s ability to maintain the
memory of the traffic signal controller. The controller is responsible for
sequencing the on and off times of the various signals. With a battery
backup system, the controller’s memory can be maintained and return to
normal operation once the outage has ended. This feature has eliminated the
time spent to reprogram controllers after a power outage
Traffic IQUPS It is designed to provide backup power for critical LED
traffic light intersections. With 1,000 watts of true sinewave power
available, IQFuel Cell and maintenance free Deep cycle batteries.
Traffic IQUPS will drive most large LED systems. Its pure sinewave output is
cleaner than utility power, making it ideal for all loads.

Total distortion is typically less than 1.5%. Manufactured in the USA to the
highest standards possible, Traffic IQUPS system is the best choice for
critical load protection. power outage knocked out traffic lights, backup
generators, emergency generator
Depending on the consumers needs, the IQFuelCell automatically charges the
battery with up to 100 Ah per day. As independent power supply or in
combination with other systems, the IQFuelCell runs self-sufficiently for
months.
The circuit is fully protected via breakers and fuses on the AC input,
connection to the batteries, and DC loads. Outdoor, lockable, aluminum
enclosure includes tamper-proof hardware suitable for pole or wall mounting.
DC ripple <50mV. |
LED
Explosion Proof use LED bulbs up to
12VDC, 24VDC, 120VAC 277VAC, 50 - 60 hertz
UL Listed for Standard 844
IQLED has been making Explosion proof Lighting systems
Construction Features Lamp compartment is factory sealed from wiring
chamber, eliminating on-the-job sealing. Inspection hole provides easily
accessible splice space. There is nothing to hold while splicing to
line. Set screw to stem keeps fixture from turning during relamping.
Three close-up plugs furnished with four hole junction box. Mounting
lugs are standard.
Lamp: LED 400+ Super Bright LED's
Housings: Heavy cast aluminum. Unit
withstands 1490 lbs. per square inch hydrostatic
pressure during UL testing
Wiring: Wiring is factory sealed.
Inspection hole provides easy access to splice
compartment
Globe: Impact and heat resistant clear
prismatic design affords excellent light control
Finish: Silver Gray Epoxy powder coat
Reflectors: Heavy gauge aluminum with highly
reflective white acrylic finish
Socket: Medium base glazed porcelain. Leads
pass through sealing compound that separates lamp
chamber from wiring compartment. Heavy gauge nickel
plated copper components. Spring loaded center
contact
|
|
Off-grid combined wind and diesel solutions for
island nations, farms, remote areas, cell
towers, exploration equipment, backup power &
water pumps for natural gas mines; rapid
deployment diesel & wind solutions (to include
airdrop) to disaster areas for power to
emergency and medical equipment, water pumps;
on-grid applications for farms, factories,
remote communities; and wind farm deployments.
Available in 3Q 2007/08
|
|
|
|

Traffic Enclosures and Cabinets |
Inverter/Charger Available in 12 - 24- and 48-volt models, it provides
utility-grade output power and offers high surge capacity
105 VAC/60 Hz - 105 VAC/50 Hz - 120 VAC/60 Hz - 220 VAC/60 Hz - 230 VAC/50 Hz-DC
to DC Converters
-DC to DC Converters Din Rail
-Din Rail Linear Power Supplies
-DIN Rail power supplies
-Din Rail Single Phase Power Supplies
-Din Rail Unregulated Line Power Supplies
-Din Rail Voltage Regulator
-Inverters Accessories
-Inverters DC/AC
-Mini Power
-Power Supplies
-Power Transformers
-Transformer |
Airport and
Heliport landing
back-up Battery Charger: 12Volts,
24 Volts, 36Volts, 48 Volts -120VAC or 230VAC
Using state-of-the-art, switch-mode technology, the DLS Power Supply series
is engineered with the user and variable environmental conditions in mind.
Extra care has been given to insure many years of service-free operation,
even when subjected to extremely harsh conditions. Batteries are charged
quickly and efficiently without over charging and pumps, motors, and fans
operate perfectly for prolonged life.
IOTA Engineering uses advanced switch mode technology to bring to market
highly sophisticated electronic converter/power supplies at appealing
affordability.
Exceptionally clean DC output insures pumps, motors, fans, and lights work
perfectly. This means longer life for any connected load; virtually no AC
ripple to cause static or premature failure of radio or television
equipment.
|
|
|